
Keystone Cabinet Refacing
Crown Molding Addition in Keystone, FL
Crown molding addition in Keystone, FL. Finish the gap above cabinets with matched molding, standalone or with refacing, free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Keystone and nearby communities.
There's usually a gap between the top of the cabinets and the ceiling that reads as unfinished no matter how nice the doors look. Crown Molding Addition closes that gap with molding cut and fitted to your cabinet tops, finished to match your new or existing doors.
Keystone Cabinet Refacing typically adds this as a finishing touch during or right after a refacing job, though it works as a standalone add-on too. It's a precision carpentry task, the angles at inside and outside corners have to be cut exactly or the seams show.
What's included
What's included with Crown Molding Addition
Typically included: cabinet top and ceiling line measurement, molding selection, precise corner cutting and fitting, finish matched to cabinet doors.
Optional: corner molding blocks for complex angles, stain or paint blending to an existing finish.
Customer prep: clear countertops below cabinet runs so installers have full access to the cabinet tops.
Want a clearer scope?
Get a Free EstimateHow it works
How our Crown Molding Addition process works
Step 1Space Measurement
Cabinet tops are measured to determine molding length and angles needed.
Step 2Molding Style Selection
Clients choose molding profiles that complement their cabinet design.
Step 3Cutting and Fitting
Molding pieces are cut to precise angles for proper corner fitting.
Step 4Surface Preparation
Cabinet tops are prepared to ensure secure molding attachment.
Step 5Molding Installation
Molding is attached and secured along the tops of cabinet runs.
Step 6Finish Touch-Ups
Seams and edges are finished to blend molding with existing cabinetry.
Materials
Materials and methods for Crown Molding Addition

Crown Molding Profiles
A range of molding profiles add decorative detail suited to custom-home kitchen styles.

Wood Molding Strips
Solid wood strips provide a traditional, durable molding option that holds paint or stain well.

Molding Adhesive
Strong adhesive secures molding firmly to cabinet surfaces, important given Florida's humidity shifts.

Finish Nails
Finish nails provide additional support for molding installation beyond adhesive alone.

Matching Stain or Paint
Finish is matched to existing cabinetry so the molding reads as original, not added on.

Corner Molding Blocks
Corner blocks simplify fitting at complex cabinet angles common in larger custom kitchens.
Questions on materials?
Get a Free EstimateTimeline
How long does crown molding addition take?
- 01
Stage 1
This is typically a quick add-on, especially when bundled with a refacing job already underway.
- 02
Stage 2
Here's how a typical project unfolds.
- 03
Measurement and style selection
same day - 04
Cutting and fitting
1 day
Need a schedule that fits?
Get a Free EstimateCost
What does crown molding addition cost in Keystone?
Pricing runs per linear foot and depends on whether it's bundled with refacing or done as a standalone job. These are honest ranges, not a fixed quote. Call (727) 493-6800 or request a free estimate for your kitchen's linear footage. <!-- rover-autofix-links -->
| Project type | Typical range | What’s included |
|---|---|---|
| Standard molding, standalone | $600-$1,500 | basic profile across a standard kitchen run. |
| Upgraded profile or larger kitchen | $1,500-$3,000 | wider profiles or more linear footage. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateNext step
Get a Crown Molding Addition estimate in Keystone
Want that finished, built-in look above your cabinets? Call (727) 493-6800 or request a free estimate below.
Codes & permits
Permits and codes for Crown Molding Addition
Always confirm with the Hillsborough County permit office if molding work is part of a larger project involving electrical or plumbing changes.
| Typically needs a permit | Often no permit |
|---|---|
| None for standard molding installation | Measuring |
| — | cutting |
| — | fitting crown molding to cabinet tops |
| — | Attaching molding with adhesive and finish nails |
| — | Finish touch-ups matching molding to existing cabinetry |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Crown Molding Addition
| DIY | Hire a pro |
|---|---|
| Simple straight-run molding on a single short cabinet section is achievable with a miter box and patience. | Inside and outside corner angles rarely match a standard 90 degrees in real kitchens, cutting them right takes a trained eye and the right saw. |
| Minor touch-up staining on an existing molding installation is reasonable. | Ceiling lines aren't always level, which means molding often needs custom scribing to sit flush. |
| — | Matching finish to cabinet doors so the molding doesn't look bolted on takes the same color-matching process used for refacing. |
Not sure DIY vs pro?
Get a Free EstimateFAQs
Crown Molding Addition FAQs
What is the most expensive part of redoing a kitchen?
Usually the cabinet boxes and doors themselves, not finishing touches like molding. Crown molding is a relatively small add-on cost compared to door replacement or full refacing.
Can crown molding be added after a refacing job is already done?
It's commonly added afterward as long as the cabinet tops and finish are already in place to match against.
How much does crown molding cost per linear foot?
Pricing typically falls in the $25-$60 per linear foot range depending on profile and whether installation is bundled with other work.
Do I need a permit for crown molding installation?
This is finish carpentry work that doesn't require a permit under Hillsborough County rules.
How long does crown molding installation take?
Most jobs wrap in 2-3 days total from measurement through finish touch-up, often faster when bundled with an active refacing project.
Is DIY crown molding installation a good idea?
For a short, simple run it can work. Complex corner angles and uneven ceiling lines are where DIY attempts usually show visible gaps.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet Refacing in Keystone, FL. Keep solid boxes, update doors and finish, skip the full gut job. Free estimates.

Kitchen Cabinet Refacing
Kitchen Cabinet Refacing near Keystone, FL. Full-kitchen door, finish, and hardware updates matched to your counters. Free estimates.

Bathroom Vanity Refacing
Bathroom Vanity Refacing in Keystone, FL with moisture-resistant finishes built for humid bathrooms. Free estimates.
Ask about Crown Molding Addition
Tell us about the project and how to reach you.