
Keystone Cabinet Refacing
Cabinet Refacing in Keystone, FL
Cabinet refacing in Keystone, FL for custom and large-lot kitchens. New doors, veneer, and hardware on your existing boxes. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Keystone and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Custom cabinet refacing Keystone FL homeowners trust for their kitchens
Dated oak doors. Peeling laminate. Hardware that doesn't match anymore. Most of the time the boxes underneath are still solid.
Keystone Cabinet Refacing works on exactly that problem. We keep your existing boxes and update the doors, drawer fronts, and exposed surfaces instead of tearing everything out. Costs less. Takes less time. The layout you already know stays put.

What we do
Cabinet Refacing services
Cabinet Refacing across Keystone and the surrounding area.
Residential Services

Cabinet Refacing
Cabinet Refacing in Keystone, FL. Keep solid boxes, update doors and finish, skip the full gut job. Free estimates.
Learn more →
Kitchen Cabinet Refacing
Kitchen Cabinet Refacing near Keystone, FL. Full-kitchen door, finish, and hardware updates matched to your counters. Free estimates.
Learn more →
Bathroom Vanity Refacing
Bathroom Vanity Refacing in Keystone, FL with moisture-resistant finishes built for humid bathrooms. Free estimates.
Learn more →
Cabinet Door Replacement
Cabinet door replacement in Keystone, FL. New doors and drawer fronts on your existing boxes, hinges adjusted, free estimates.
Learn more →
Cabinet Refinishing & Painting
Cabinet refinishing and painting in Keystone, FL. Update color and finish without replacing doors or boxes, free estimates.
Learn more →
Custom Cabinet Doors
Custom cabinet doors in Keystone, FL. Made-to-measure doors for nonstandard openings and specific styles, free estimates.
Learn more →
Kitchen Island Refacing
Kitchen island refacing in Keystone, FL. Match island cabinetry to the rest of your kitchen, standalone or bundled, free estimates.
Learn more →
Thermofoil & Laminate Peeling Repair
Thermofoil and laminate peeling repair in Keystone, FL. Repair or replace damaged surfaces with a free in-home estimate.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Keystone Cabinet Refacing
Finish-matching, not guesswork
New doors and veneer are matched to your existing boxes, counters, and floors before install day.
Built for Florida humidity
Material choices account for AC cycling and summer humidity, not just a catalog swatch.
Written estimates, in person
A specialist measures your kitchen on site and gives you a number on paper, not a phone guess.
Scoped for larger kitchens
Keystone's bigger custom layouts get planned for linear footage and island faces, not a cookie-cutter package.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist visits your Keystone kitchen to review cabinetry and talk through style goals.
Step 2Measurement & Design
Precise measurements plan door sizes and layout for larger custom-home kitchen runs.
Step 3Material Selection
Homeowners pick veneers, finishes, and hardware suited to Tampa Bay's humid summers.
Step 4Surface Preparation
Existing boxes are cleaned, sanded, and repaired for a smooth refacing surface.
Step 5Refacing Installation
New veneers, doors, and panels are fitted to your existing cabinet frames.
Step 6Final Walkthrough
A final inspection confirms alignment, finish quality, and working hardware before closeout.
Ready to start?
Get a Free EstimateCost
What does cabinet refacing cost in Keystone?
Price depends on door material, how many boxes you're covering, and whether hardware gets upgraded along the way. These are honest ranges, not a locked-in quote. A free estimate gets you a number specific to your kitchen, measured in person.
| Project type | Typical range | What’s included |
|---|---|---|
| Door-only updates | $2,500–$6,000 | new doors and drawer fronts on solid boxes. |
| Standard kitchen refacing | $6,000–$12,000 | doors, veneer, and hardware for an average kitchen. |
| Large custom kitchen refacing | $12,000–$18,000+ | bigger linear footage, islands, and premium door material. |
| Add-on upgrades | $300–$1,500 | soft-close hinges, crown molding, or hardware swaps bundled in. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and methods we use
Materials get picked with Tampa Bay's humidity in mind, not just color and style.

Wood Veneer Sheets
Thin wood veneers go over your existing boxes for a natural look that holds up better than foil in a humid kitchen.

Laminate Finishes
Durable laminate gives an easy-to-clean, cost-effective surface for high-traffic cabinet runs.

Solid Wood Doors
New solid wood doors swap in for old fronts, standing up to seasonal humidity swings better than particleboard.

Cabinet Hardware
Knobs, pulls, and hinges get matched to the updated door style and finish.

Soft-Close Hinges
Upgraded hinges close quietly and reduce wear on door edges over time.

Protective Topcoat
A clear sealant layer guards finished surfaces against moisture and daily use in Florida's AC-cycling climate.
Questions on materials?
Get a Free EstimateTimeline
How long does cabinet refacing take?
A typical project moves through a few clear stages, with most of the wait tied to door fabrication rather than labor on site.
- 01
Consult and measure
same day - 02
Door fabrication
2–3 weeks - 03
Box prep and veneer
1–2 days - 04
Install and hardware
2–4 days - 05
Final walkthrough
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance
Rules vary by job scope. Check with the Hillsborough County permit office before any work that touches electrical or plumbing.
| Typically needs a permit | Often no permit |
|---|---|
| Adding new under-cabinet electrical lighting | Replacing doors and drawer fronts |
| Relocating plumbing for a sink or dishwasher | Applying new veneer to existing boxes |
| Reconfiguring an island with new utility runs | Swapping hardware |
| — | hinges |
| — | or pulls |
| — | Refinishing or repainting existing cabinets |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a Cabinet Refacing pro
| DIY | Hire a pro |
|---|---|
| Swapping knobs and pulls for an updated look | Matching new veneer and door finish to existing counters and floors |
| Minor hinge adjustments on doors that already fit | Assessing whether boxes are square and solid enough to reface |
| Simple cleaning and degloss prep for small touch-ups | Fabricating and fitting custom doors for nonstandard openings |
| — | Installing soft-close hardware evenly across a full kitchen |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Cabinet Refacing
Call (727) 493-6800 or request a free estimate to get a specialist out for a look.
- Doors or drawer fronts have peeling thermofoil or bubbling laminate
- Finish looks dated compared to newer counters or flooring
- Hardware is mismatched, loose, or slamming shut
- Boxes feel solid, but the look no longer fits the home
- You're planning a counter or floor update and want cabinets to match
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Keystone and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Citrus Park · Northdale · Westchase · Cheval · Odessa · Carrollwood · Trinity · Lake Magdalene · East Lake · Lutz · and others
Outside these locations?
Before & after
See the work up close

Before 
After
Customer feedback
What local customers say

Eric F.
5 days ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the cabinet refacing turned out better than I pictured.
Keystone, FL
Justin S.
4 weeks ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for premium wood finishes. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Keystone Reserve, FL

Nancy F.
2 weeks ago
5 out of 5 starsCalled Keystone Cabinet Refacing after a neighbor tip in Keystone. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our soft-close hardware upgrades.
Cheval, FL
Common questions
Cabinet Refacing FAQs
What are common issues with a builder grade kitchen?
Builder-grade boxes often use thin thermofoil or basic laminate that peels at the seams within a few years, especially near the dishwasher and oven. Hinges loosen, particleboard swells at the sink base, and finishes fade faster than solid wood or quality veneer would.
What kitchen cabinet colors will look outdated in 2026?
Heavy orange-toned oak and stark all-white with gold everything are both sliding out of favor. Warmer neutrals, two-tone layouts, and deeper greens or navies on islands are holding up better as a lasting look.
What is the most expensive part of redoing a kitchen?
Moving plumbing or electrical, plus new cabinet boxes, drives most of a full remodel's cost. Refacing sidesteps both of those line items by keeping your current boxes and layout in place.
How much does Cabinet Refacing cost in Keystone?
Most full-kitchen refacing jobs land between $6,000 and $18,000 depending on door material, box count, and hardware upgrades. A free in-home estimate gets you an exact number for your kitchen.
How long does Cabinet Refacing take?
A typical kitchen runs about one to two weeks from measure to final walkthrough, with most of that time spent waiting on custom doors to arrive. Install itself is usually a few days.
Do I need a permit for Cabinet Refacing?
Refacing alone usually doesn't require a Hillsborough County permit. If the job expands into new electrical for under-cabinet lighting or plumbing moves for a sink relocation, that part needs one.
Is DIY Cabinet Refacing a good idea?
Swapping a few pulls or knobs is a fine weekend project. Full box veneering and finish-matching to existing counters is harder to get right without the right tools and a steady hand.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Keystone.
