Keystone Cabinet Refacing logoKeystone Cabinet RefacingKeystone, FL
Menu
cabinet refacing in Keystone, FL

Keystone Cabinet Refacing

Cabinet Refacing in Keystone, FL

Cabinet Refacing in Keystone, FL. Keep solid boxes, update doors and finish, skip the full gut job. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Keystone and nearby communities.

Dated doors. Peeling veneer. Boxes that are still square and solid underneath it all. That combination is what sends most Keystone homeowners looking for refacing instead of a full kitchen tear-out.

Keystone Cabinet Refacing works on exactly that gap. A lot of the custom homes out here were built with real wood boxes, the kind worth keeping. Refacing swaps the doors, drawer fronts, and exposed veneer while leaving the cabinet carcass alone, which is why it costs a fraction of a full replacement and takes a fraction of the time.

What's included

What's included with Cabinet Refacing

Typically included

  • New door and drawer fronts matched to your chosen style
  • Veneer applied to exposed box faces and end panels
  • New hinges and matching hardware
  • Removal and disposal of old doors and fronts

Optional

  • Soft-close hinge and slide upgrades
  • Crown molding added above upper cabinets
  • Interior shelf or organizer additions

Customer prep

  • Clear counters near cabinets before the crew arrives
  • Decide on door style and finish ahead of the measure visit

How it works

How our Cabinet Refacing process works

  1. Cabinet Assessment photo
    Step 1

    Cabinet Assessment

    Existing cabinet boxes are inspected for structural soundness before refacing begins.

  2. Design Consultation photo
    Step 2

    Design Consultation

    Clients review finish and style samples to plan the new cabinet appearance.

  3. Box Preparation photo
    Step 3

    Box Preparation

    Surfaces are cleaned and lightly sanded to help new materials adhere properly.

  4. Veneer Application photo
    Step 4

    Veneer Application

    Matching veneer is applied to exposed cabinet surfaces for a smooth finish.

  5. New Door Fitting photo
    Step 5

    New Door Fitting

    Replacement doors and drawer fronts are installed to complete the updated look.

  6. Quality Check photo
    Step 6

    Quality Check

    Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.

Materials

Materials and methods for Cabinet Refacing

Keystone sits in a humid subtropical stretch of Hillsborough County, so material choice matters as much as style.

  • Rigid Thermofoil photo

    Rigid Thermofoil

    A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance. It holds up well away from direct heat sources common in larger custom kitchens.

  • Wood Veneer photo

    Wood Veneer

    Natural wood veneer offers an authentic grain look over existing cabinet boxes. On large-lot homes with solid original boxes, veneer keeps that wood character intact.

  • Adhesive Bonding Agents photo

    Adhesive Bonding Agents

    Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term, which matters when summer humidity swings are part of the deal here.

  • Matching Drawer Fronts photo

    Matching Drawer Fronts

    New fronts are crafted to match replacement doors for a unified design.

  • Edge Banding photo

    Edge Banding

    Edge banding finishes exposed panel edges for a clean, professional look.

  • Cabinet Hardware Sets photo

    Cabinet Hardware Sets

    Coordinated hardware sets complete the refaced cabinetry with a polished finish.

Cost

What does cabinet refacing cost in Keystone?

Price depends on door count, box condition, and how much hardware gets upgraded. These are honest ranges, not a locked quote. Call (727) 493-6800 or request a free estimate for a number based on your actual cabinet count.

Project typeTypical rangeWhat’s included
Door-only tier$4,000–$7,500new doors and drawer fronts plus hardware on solid boxes.
Standard refacing$7,500–$14,000full veneer, new doors, and hardware across a mid-size kitchen.
Large custom kitchen$14,000–$24,000+extended linear footage, island faces, and premium wood veneer.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Codes & permits

Permits and codes for Cabinet Refacing

Typically needs a permitOften no permit
Electrical work added for new under-cabinet lightingDoor and drawer front replacement
Plumbing changes tied to a sink or island relocationVeneer application to existing boxes
Structural changes to cabinet layout or wall openingsHardware swaps and hinge upgrades

DIY vs pro

DIY vs hiring a pro for Cabinet Refacing

DIYHire a pro
Swapping a few knobs or pulls on sound hardwareMatching new veneer color and grain to existing wood tones
Light touch-up staining on a small, accessible areaAssessing whether box corners are still square enough to reface
Minor hinge tightening or adjustmentFitting doors so they sit flush without gaps or rubbing
—Working around plumbing or electrical if the project expands

Before & after

Before and after Cabinet Refacing results

  • cabinet refacing in Keystone, FL
    Before
  • cabinet refacing in Keystone, FL
    After

FAQs

Cabinet Refacing FAQs

Is refacing cheaper than replacing cabinets entirely?

Yes, . Refacing keeps the existing boxes and only replaces doors, fronts, and surface material, which cuts labor and material cost well below a full gut-and-rebuild.

How much does Cabinet Refacing cost in Keystone?

Most projects land between $4,000 and $24,000 depending on kitchen size, door material, and hardware choices. A written estimate after an in-home measure gives you an exact number.

How long does Cabinet Refacing take?

A typical kitchen runs one to three weeks from measure to install, with the install itself usually wrapped in two to four days.

Do I need a permit for Cabinet Refacing?

Refacing alone usually doesn't require one. If the job grows to include new electrical or plumbing work, Hillsborough County permitting applies.

How do I know if my cabinet boxes are solid enough to reface?

Square corners, tight joints, and no soft or swollen particleboard are the main signs. Our box assessment during the first visit confirms it before you commit to anything.

What's the difference between refacing and refinishing?

Refacing replaces doors, drawer fronts, and exposed veneer. Refinishing works with the existing doors and boxes through prep and new paint or stain, no new doors involved.

Next step

Get a Cabinet Refacing estimate in Keystone

Call (727) 493-6800 or request a free estimate. We'll come measure your kitchen and give you real numbers, not a guess over the phone. See our Kitchen Cabinet Refacing page if you're planning a full-kitchen project, or head back to Home or Contact.

Ask about Cabinet Refacing

Tell us about the project and how to reach you.

Call (727) 493-6800