Keystone Cabinet Refacing logoKeystone Cabinet RefacingKeystone, FL
Menu
cabinet door replacement in Keystone, FL

Keystone Cabinet Refacing

Cabinet Door Replacement in Keystone, FL

Cabinet door replacement in Keystone, FL. New doors and drawer fronts on your existing boxes, hinges adjusted, free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Keystone and nearby communities.

If the boxes are square and solid but the doors look dated, chipped, or just don't match the house anymore, door replacement is the fastest way back to a finished look without touching the rest of the kitchen. Keystone Cabinet Refacing measures every opening by hand before ordering, since custom-home kitchens here often have openings that drift a little from standard sizing.

This service is doors and drawer fronts only, boxes stay in place. It's a good fit when the cabinet interiors are clean, the hinges still mount solidly, and the only complaint is the front-facing look.

What's included

What's included with Cabinet Door Replacement

Typically included: new doors and drawer fronts sized to your openings, hinge adjustment or replacement, matching hardware mounting.

Optional: soft-close hinge upgrades, glass insert panels, crown molding added above the new doors.

Customer prep: clear counters near cabinet runs and confirm your preferred door style before the measure visit.

How it works

How our Cabinet Door Replacement process works

  1. Door Measurement photo
    Step 1

    Door Measurement

    Existing door openings are measured precisely to ensure accurate replacement fit.

  2. Style and Finish Choice photo
    Step 2

    Style and Finish Choice

    Clients select door styles and finishes to match their cabinet boxes.

  3. Door Fabrication photo
    Step 3

    Door Fabrication

    New doors are cut and finished according to measured specifications.

  4. Hinge Fitting photo
    Step 4

    Hinge Fitting

    Hinges are installed or adjusted to ensure proper door alignment.

  5. Door Installation photo
    Step 5

    Door Installation

    New doors are mounted and leveled onto existing cabinet frames.

  6. Alignment Check photo
    Step 6

    Alignment Check

    Doors are checked for even spacing and smooth opening and closing.

Materials

Materials and methods for Cabinet Door Replacement

  • Shaker Style Doors photo

    Shaker Style Doors

    Shaker doors offer a clean, versatile look that holds up well in Florida's humidity swings without obvious seams.

  • Raised Panel Doors photo

    Raised Panel Doors

    Raised panel doors add traditional dimension and detail, popular in Keystone's larger custom kitchens.

  • Flat Panel Doors photo

    Flat Panel Doors

    Flat panel doors provide a modern, streamlined cabinet appearance that's easy to keep clean.

  • Concealed Hinges photo

    Concealed Hinges

    Concealed hinges keep hardware hidden for a sleek door appearance and stand up to daily use.

  • Glass Insert Panels photo

    Glass Insert Panels

    Glass inserts allow display options within select cabinet door designs for upper cabinets.

  • Door Pulls and Knobs photo

    Door Pulls and Knobs

    New pulls and knobs complement the replaced door styles and finish the overall look.

Timeline

How long does cabinet door replacement take?

  1. 01

    Stage 1

    Most door-only projects move faster than a full refacing job since the boxes aren't touched.

  2. 02

    Stage 2

    Here's how a typical project unfolds.

  3. 03

    Measure visit

    same day
  4. 04

    Door fabrication

    2–3 weeks

Need a schedule that fits?

Get a Free Estimate

Cost

What does cabinet door replacement cost in Keystone?

Pricing on this service is driven by door count, material, and whether hardware gets upgraded at the same time. These are honest starting ranges, not a locked quote. Call (727) 493-6800 or request a free estimate for an exact number based on your door count. <!-- rover-autofix-links -->

Project typeTypical rangeWhat’s included
Hardware-only swap$500-$1,500new pulls/knobs on existing doors, no door replacement.
Standard door replacement$3,000-$7,000MDF or laminate doors across a full kitchen.
Solid wood upgrade$7,000-$12,000solid wood doors with soft-close hinges throughout.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Next step

Get a Cabinet Door Replacement estimate in Keystone

Ready to swap tired doors for a finished look? Call (727) 493-6800 or request a free estimate below.

Codes & permits

Permits and codes for Cabinet Door Replacement

Always confirm with the Hillsborough County permit office if your project adds electrical or plumbing work.

Typically needs a permitOften no permit
None for door and drawer front replacement aloneSwapping doors
—drawer fronts
—hinges on existing boxes
—Hardware upgrades paired with door replacement
—Adding or removing cabinet doors without structural changes

DIY vs pro

DIY vs hiring a pro for Cabinet Door Replacement

DIYHire a pro
Swapping a knob or pull on an existing door is reasonable for most homeowners.Measuring non-standard openings accurately across a full kitchen takes practice.
Replacing a single damaged door with a stock size can work if openings are standard.Matching new door finish to existing cabinet boxes requires color and sheen matching.
Basic hinge tightening is simple maintenance.Concealed hinge installation needs precise boring and alignment to avoid gaps.

When to call

When to call for Cabinet Door Replacement

Call (727) 493-6800 for a free estimate.

  • Doors are chipped, warped, or visibly dated but the boxes are still solid.
  • Hardware doesn't match current fixtures or finishes in the kitchen.
  • Hinges are loose or doors don't close flush anymore.

FAQs

Cabinet Door Replacement FAQs

Is DIY cabinet door replacement a good idea?

It works for a single stock-size door or a hardware swap. Once you're replacing doors across a whole kitchen with non-standard openings, measuring and finish-matching gets harder to get right without a pro doing the layout.

What's the difference between refacing and door replacement?

Refacing covers the doors plus veneer on exposed box surfaces. Door replacement is doors and drawer fronts only, with the existing box finish left as-is. It's a lighter-scope, lower-cost option when the box faces don't need covering.

How much does cabinet door replacement cost in Keystone?

Most projects run $3,000 to $12,000 depending on door material and count. Solid wood and soft-close upgrades push toward the higher end.

How long does cabinet door replacement take?

Fabrication typically runs 2-3 weeks, with installation itself taking 1-2 days once doors arrive.

Can hardware be upgraded at the same time?

Pulls, knobs, and hinges are commonly swapped during door replacement since the doors are already off the boxes.

Do I need a permit for cabinet door replacement?

This scope doesn't touch electrical or plumbing, so it's permit-free under Hillsborough County rules.

Ask about Cabinet Door Replacement

Tell us about the project and how to reach you.

Call (727) 493-6800